(1010 products available)
Canter trucks are light and flexible commercial vehicles that have a high loading capacity. They can be used for different purposes such as construction, delivery, and transportation of goods. Various manufacturers offer different types of Canter trucks for sale. Below are some common types of Canter trucks:
Specifications of Canter Truck for sale are very important when making a purchase decision. Here are some common specifications to expect.
Engine
Canter Truck for sale have a powerful engine. The engine offers a capacity between 3.0 and 3.5 liters. The engine also generates a horsepower of 110-150.
Transmission
Canter truck models have a standard manual transmission system. The transmission system has a 5-speed or 6-speed gearbox. The trucks also have an automatic transmission system with 6-speed gear ratios.
Payload capacity
The payload capacity is the total weight that a truck can carry. The payload capacity of the Canter Truck for sale ranges from 1.5 to 7 tons. This means that the truck can carry goods weighing 1500 to 7000 kilograms.
Towing Capacity
The towing capacity of the Canter truck ranges from 3,000 kg to 5,000 kg. This means the truck can pull goods or cargo that weighs up to 5 tons.
Dimensions
The length of the truck is between 4,500 and 7,500 meters. The width of the Canter Truck for sale ranges between 1,700 and 2,500 meters. The height of the truck measures between 2,000 and 3,000 meters.
Brakes
The braking system of the Canter Truck for sale consists of drum brakes and disc brakes. The trucks also have anti-lock braking systems.
It is important to check the specifications of the Canter Truck before purchasing. In addition to that, here are some maintenance practices to enhance the functionality of the truck.
Regular Oil Changes
It is important to change the oil of the truck after every 5000 km. Changing the oil helps to keep the engine clean and lubricated. When the oil is changed, it is easy to prevent wear and tear of the engine.
Tire Maintenance
Inspecting the tires regularly helps to identify warning signs such as punctures and uneven wear. The pressure of the tires should be gauged frequently. This makes sure that the tires of the truck have the recommended pressure.
Brake Inspection
The brakes of the truck should be inspected regularly. This guarantees that the braking system is in good condition. Factors such as worn-out brake pads and low brake fluids should be checked. The brake pads and brake fluids should be replaced after the recommended mileage has been achieved.
Regular Engine Maintenance
The air filter of the truck should be checked regularly. This is because a clean air filter enhances the performance of the engine. The spark plugs should also be inspected regularly. This is because the spark plugs help to ignite the fuel in the engine.
Regular Suspension Inspection
The suspension system of the Canter truck should be inspected frequently. This is because the suspension system helps to absorb shocks and impacts when driving. The shock absorbers, spring, and suspension bushings should be checked for wear and tear.
Regular Vehicle Inspection
Regular vehicle inspection helps to ensure that all the truck parts are in good condition. This is achieved by taking the truck to a qualified mechanic.
Canter trucks are light-duty vehicles that are often used for commercial purposes. When looking for a Canter truck for sale, consider the following:
Replacing parts of a Canter Truck can be a complicated task. Nonetheless, here are some tips for replacing some parts of the Canter truck:
Replacing the Canter Truck Battery:
Switch off the engine and all electrical devices. Release the battery clamps, then the nut, and loosen the screw using a wrench. Push the clamp off the battery post. Do the same with the negative post, but in the opposite direction. To install a new battery, clean the clamps and battery posts and apply a thin coating of petroleum jelly. Then, slide the clamps on the battery posts and secure them. Tighten the screws or nuts gently.
Replacing a Canter Truck Tire:
Park the car on a level surface and activate the parking brake. Loosen the lug nuts partially while the car is still on the ground. Then, raise the truck with a jack. When the truck is raised, completely unscrew the lug nuts and remove the old tire. Place the new tire and tighten the lug nuts in a crisscross pattern. After tightening the nuts, lower the truck and torque the nuts to the manufacturer's specifications.
Replacing the Canter Truck Oil Filter:
Consult the user's manual to find the oil filter's precise location. Use an oil drain pan to catch any oil that may leak when removing the old oil filter. Before installing the new oil filter, lubricate its O-ring with a small amount of clean oil. Then, tighten the new oil filter by hand until it makes contact with the surface, then tighten it an additional three-quarters of a turn.
Replacing the Canter Truck Air Filter:
Unscrew the nuts or clamps holding the air filter box lid and take out the old air filter. Inside the box, debris and a damaged filtering element can be seen. Put the new air filter into the air filter box and secure the lid.
Replacing the Canter Truck Fuel Filter:
Locate the fuel filter following the instructions in the user's manual. Relieve the fuel system pressure, then drain any fuel from the filter into an appropriate container. Disconnect the filter's inlet and outlet hoses and install the new filter, ensuring the arrow on the filter points in the fuel flow direction. Tighten the clamps and bolts to avoid leakage.
Q1: Is the Canter truck good for off-road driving?
A1: Yes, the Mitsubishi Canter is known for its ruggedness. Its off-road capabilities can be enhanced by installing some truck accessories, such as all-terrain tires and a suspension lift.
Q2: Can the Canter truck be customized for specific business needs?
A2: Absolutely! The Mitsubishi Canter is highly customizable. It can be modified to suit various industries, such as refrigerated bodies for food transportation or specialized cargo beds.
Q3: What is the fuel efficiency of the Canter truck?
A3: Generally, Canter trucks have good fuel efficiency. However, their fuel efficiency can be affected by factors such as the truck's load and driving conditions.